Motographix Fitting Guide

Fitting Guide

Recommended application method for all Motografix products

Make sure the surface is clean and free of dust, oil, dirt, silicon and polish, we recommend you wash the area as usual and then rinse with plenty of clean water. The next step would be to thoroughly dry the area with a lint free cloth and once satisfied finish by dry wiping the area with methylated spirit or something similar to give the surface a good clean, degreased finish.

Adhesion works best when the product is around room temperature, the gentle use of a hair dryer will aid this process if your applying during colder winter months. Once warm and flexible remove from the backing while trying to avoid unnecessary adhesive contact with fingers as fingerprints can effect adhesion. Carefully position the part correctly to the surface of the bike smoothing out any air pockets as you apply, we suggest smoothing from the centre out to the edges for best results.